MFC-8220
SERVICE MANUAL
A-43
WSW42 (Function setting 20)
Selector
No.
Function Setting and Specifications
1 Incoming mail server POP*
1
0: OFF 1: ON
2 Incoming mail server SMTP*
2
0: OFF 1: ON
3 Internet-FAX forward function 0: OFF 1: ON
4 JBIG*
3
coding system 0: Disabled 1: Enabled
5-8 Not used.
*
1
POP: Post Office Protocol
*
2
SMTP: Simple Mail Transfer
Protocol
*
3
JBIG: Joint Bi-level Image
Group
NOTE:
• Selectors 1 through 3 are applicable to those models equipped with LAN interface.
l Selector 3: Internet-FAX forward function
If this selector is set to "ON," the machine may forward a FAX message received through
Internet to other remote G3 facsimile equipment.
WSW43 (Function setting 21)
Selector
No.
Function Setting and Specifications
1 Addition of a header (station ID) to
FAX images to be sent to PCs
having e-mail addresses
0: Yes 1: No
2
3
Wait time for PCFax reception
(Class 2) and FPTS command
transmission
No. 2 3
0 0 : 50 ms
0 1 : 100 ms
1 0 : 150 ms
1 1 : 0 ms
4
5
Detection time of 2100 Hz CED or
ANSam
No. 4 5
0 0 : 200 ms
0 1 : 300 ms
1 0 : 400 ms
1 1 : 500 ms
6 Not used.
7 Automatic start of remote
maintenance
0: No 1: Yes
8 JPEG coding (Not used.) 0: Disabled 1: Enabled
NOTE:
Selector 1 is applicable to those models equipped with LAN interface.
l Selector 8: JPEG coding (Not used.)
Setting this selector to “0” disables the equipment from sending/receiving JPEG color images
and from receiving JPEG monochrome images.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
