MFC-8220
SERVICE MANUAL
A-1
APPENDIX 1 EEPROM CUSTOMIZING CODES
This function allows you to customize the EEPROM according to language, function settings,
and firmware switch settings.
< Operating Procedure >
(1) To make the machine enter the maintenance mode, press the Menu button,
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
The machine beeps for approx. one second and displays "
"
on the LCD, indicating that it is placed in the initial stage of the maintenance mode, a
mode in which the machine is ready to accept entry from the keys.
(2) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 9001 in the case of MFC8220 U.S.A. version)
appears.
(3) Enter the desired customizing code (e.g., 9001 in the case of MFC8220 U.S.A.
version). The newly entered code appears.
NOTE:
The machine does not work properly when an incorrect code is entered.
(4) Press the Start button.
The machine saves the setting and returns to the initial stage of the maintenance
mode.
If you press the Stop/Exit button or no keys are pressed for one minute in the above
procedure, the machine stops the procedure and returns to the initial stage of the
maintenance mode.
< EEPROM Customizing Codes List >
Models
Versions
MFC-8220
U.S.A. 9001
Canada 0002
Germany 0003
United Kingdom 0004
France 0005
Belgium 0008
New Zealand 0009
Switzerland 0010
Ireland 0004
Denmark 0013
Austria 0003
Spain 0015
Italy 0016
Portugal 0018
Pan/Nordic (Norway, Finland, Sweden) 0057
General 0050
To Next Page
Loading...
Need help?
General
Weight and Dimensions
