Brother MFC-9330CDW Service Manual

2-29
Confidential
Toner Error One or more Toner
Cartridges are not
detected. Pull out
and reinsert all 4
Toner Cartridges.
The develop release sensor
detected the develop roller
disengagement or engagement
failure.
6E00 2-57
Toner Low Prepare New Toner
Cartridge.
Dot counter of the toner cartridge
or develop roller counter reaches
the upper limit soon.
4B01
4B02
4B03
4B04
2-45
Touchscreen
initialization
failed
Remove any
material which is
on the touchscreen.
An error occurred during touch
panel initialization.
D800 2-79
Unusable
Device
Remove the
Device. Turn the
power off and back
on again.
Overcurrent was caused because a
USB device that did not meet the
specifications was inserted into the
USB port.
EC00 2-81
Error message
Description
Error
codes
Refer
to:
Upper line Lower line

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes