Burford 2000 - Flow Chart 0-31 Needle Punches Holes through Bag Neck

146 Chapter 7
Flow Chart 0-31 Needle Punches Holes Through Bag Neck
Needle punches a hole through the bag neck
SAFETY WARNING:
The following troubleshooting procedure may require that tests be made with the electrical enclosures
open and power turned “ON”. These tests should only be conducted by authorized personnel who are
aware of the electrical and mechanical hazards present.
Bag switch arm
is set too low,
allowing false
indication of bag
trailing edge.
Raise the end of the
bag switch arm.
Reset bag switch
arm to factory
specification.