82
Chapter 5
Needle Roller Replacement
To change the rollers, power down machine and open cover to expose needle assembly.
Unthread the needle, then rotate needle to appropriate angle to access screws.
There are two rollers on the needle assembly (152124) and (302065). Each roller is
attached to the assembly with a #8 Button Head Screw (986908) that uses a 3/32 Allen
Head Wrench.
Each roller also has a bushing (152125) that fits in the middle of the roller over the screw
between the needle arm.
See next page for exploded view of assembly and steps on how to access rollers and
bushings.
Ribbon Roller #2
(302065)
Roller Screws
Nylon Roller #1
(152124)
The rollers used in the needle assembly are different and have
differing descriptions and part numbers.
To Next Page
Loading...
