Settings and Adjustments 79
Gathering Brush Air Adjustments
The gathering brush comes standard with an air
regulator. The air blows the bag tail down, prior to the
gathering brush gathering the bag tail tight against the
brush. The amount of air can be adjusted by turning the
knob on the regulator to increase or decrease the airflow.
Ribbon Dispenser Adjustment
Determine if the spool assembly needs to be adjusted by turning each of the spools while
depressing the dancer arm. If each spool does not turn freely, when the dancer arm Nyloc
nut aligns with the edge of the plate, adjustments will be needed.
Spool
Plate Edge
To Next Page
Loading...
