Burford 2000 - Main Enclosure; Main Disconnect

32 Chapter 2
 Main Enclosure
The Main Enclosure controls the power to the unit. The Main Disconnect, E-Stop, Start,
and audible alarm are housed on the door. This is where the machine is turned “ON” or
“OFF”. Turn the Unit “ON” by turning the disconnect Switch to the “ON” position. The
Interface for Baggers and / or conveyor interlocks are located in the Main Enclosure.
 Main Disconnect
The main disconnect controls the power to the unit. This is where the machine is turned
“ON” or “OFF”. Turn the Unit “ON” by turning the disconnect Switch to the “ON” position.
Shown above is the standard disconnect
switch in the “OFF” position. Turn the
handle 90º clockwise to turn the unit ON.