◼ Using a Telephone to Receive Faxes (Remote Reception)
When you pick up the telephone and get a fax signal, you do not need to go to the machine to receive the fax. Just
enter a specic ID number (default setting: 25) with the telephone, and you can start receiving the fax.
● When the telephone is not directly connected with the machine, the remote reception function is not
available.
1
When an incoming call rings, pick up the telephone handset.
2
If you hear a beep, enter the ID number for Remote Reception with the telephone.
● The ID number is set to "25" by default. You can change this number as necessary. Remote RX(P. 662)
3
Hang up the handset.
LINKS
Sending and Receiving Faxes According to Your Purposes (MF419x / MF416dw)(P. 183)
Checking Status and Log for Sent and Received Documents(P. 201)
Faxing
182
To Next Page
Loading...
