EasyManua.ls Logo

Canon MF418x - Page 404

Canon MF418x
917 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Select the check box to enable AirPrint. To disable AirPrint, clear the check box.
[Printer Name]/[Location]/[Latitude]/[Longitude]
Enter the name and the installation location information to help you identify this machine when operating
your Apple device. This information is useful if you have more than one AirPrint printer.
If you select the [Use AirPrint] check box
The following items are also set to <On> automatically.
<mDNS Settings> for IPv4 and IPv6
Conguring DNS(P. 488)
<Use HTTP> Disabling HTTP Communication(P. 567)
<Use IPP Printing> under <IPP Print Settings>
Changing the Setting of Functions Available with
AirPrint(P. 395)
<Use Network Link Scan> Changing the Setting of Functions Available with AirPrint(P. 395)
If you change [Printer Name]
If you change [Printer Name] that you have once specied, you may be unable to print any more from the
Mac that has been able to be used for printing so far. This phenomenon occurs because <mDNS Name>
(
Conguring DNS(P. 488) ) of IPv4 is also changed automatically. In this case, add the machine to the
Mac again.
6
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Changing the Setting of Functions Available with AirPrint
If you want to disable functions that you are not going to use with AirPrint or encrypt communications, congure the
necessary setting using the operation panel.
Changing Print and Fax Settings
To perform printing or fax sending with AirPrint, IPP protocol is used.
Turning the function On/Off
You can specify whether to perform printing and fax sending with AirPrint. The factory default setting is <On>.
<Menu> <Network Settings> <TCP/IP Settings> <IPP Print Settings> <Use IPP
Printing>
Select <Off> or <On>
Changing the TLS setting
You can specify whether to encrypt communications using TLS when performing printing or sending faxes with
AirPrint. The factory default setting is <Off>.
When the machine is connected to a Mac via USB, set <Use TLS> to <Off>.
Can Be Used Conveniently with a Mobile Device
395

Table of Contents

Related product manuals