2
Adjust the positions of the paper guides to the paper size you want to use.
● Press the lock release lever ( ) to align the projection ( ) to the appropriate paper size markings.
3
Load the paper so that the edge of the paper stack is aligned against the paper guide
on the rear side of the paper drawer.
● Load the paper in portrait orientation (with the short edge toward the machine), with the print side face
down. Paper cannot be loaded in landscape orientation.
● Fan the paper stack well, and tap it on a at surface to align the edges.
Do not exceed the load limit line when loading paper
● Make sure that the paper stack does not exceed the load limit line ( ). Loading too much paper can
cause paper jams.
● When loading paper with a logo, see Loading Preprinted Paper(P. 63) .
Basic Operations
54
To Next Page
Loading...
