[Fax Number]
Enter the fax number of the destination.
[ECM TX]
Select the check box to make the following possible: if an error occurs in an image that is being sent, the error is
checked and corrected to prevent an improper image from being sent.
[Speed]
If it takes time for transmissions to start, such as when there is a poor telephone connection, you can adjust the
transmission start speed downward incrementally starting from [33600 bps].
[Long Distance]
Specify [International (1)] to [International (3)] according to the transmission conditions when registering
overseas fax numbers.
● You can also specify [ECM TX] and [Speed] from <Fax Settings> (
Fax Settings (MF419x / MF416dw)
(P. 655) ) on the operation panel. However, settings made from <Address Book> are enabled for the
detailed settings of destinations registered in the Address Book.
To register the e-mail or I-Fax destination
[Name]
Enter the name of the destination.
[E-Mail Address]/[I-Fax Address]
Enter the e-mail address of the destination.
To register the shared folder or FTP server destination
[Name]
Enter the name for the destination.
[Protocol]
Using Remote UI
626
To Next Page
Loading...
