3
Load the paper so that the edge of the paper stack is aligned against the front side of
the paper drawer.
● Load the paper with the print side face down.
● Fan the paper stack well, and tap it on a at surface to align the edges.
Do not exceed the load limit line when loading paper
● Make sure that the paper stack does not exceed the load limit line (
). Loading too much paper can
cause paper jams.
● When loading paper with a logo, see Loading Preprinted Paper(P. 63) .
4
Align the paper guides against the edges of the paper.
● Press the lock release lever and slide the paper guides inward until they are aligned securely against the
edges of the paper.
Basic Operations
56
To Next Page
Loading...
