Cisco 7925G Administration Guide

Configuration ReferenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified IP Phone Configuration” chapter
(Release 4.x)
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”
chapter (Release 5.x and later)
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
Indicates (and allows a user to answer) an incoming call that
rings while the user is on another call. Displays incoming call
information on the phone screen.
Call waiting
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Configuring Cisco Unified IP Phones”
chapter
•
Cisco Unified Communications
Manager System Guide, “Understanding
Route Plans” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Call Display Restrictions” chapter
Displays caller identification such as a phone number, name,
or other descriptive text on the phone screen.
Caller ID
For more information, see:
•
Cisco Unified Communications
Manager Features and Services Guide,
“Calling Party Normalization” chapter
•
Cisco Unified Communications
Manager System Guide, “Using the
International Escape Character +”
chapter
Enables call backs to DNs that are routed through multiple
geographical locations without having to modify the DN in
the call log directories. DNs can be globalized and localized
so that the appropriate calling number displays on the phone.
To globalize a DN, use the international escape character, plus
(+).
Calling Party
Normalization
For more information, see the Feature
Configuration Guide for Cisco Unified
Communications Manager.
Enables the wireless phones to use the Location Service in
Cisco Unified Communications Manager Release 11.0.
Cisco Unified
Communications
Manager Location
Service Support
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
152
Features, Templates, Services, and Users
Telephony Features Available

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g