EasyManuals Logo

Cisco 7925G Administration Guide

Cisco 7925G
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
Configuration ReferenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, Call Park and Directed Call
Park chapter.
Allows a user to transfer an active call to an available directed
call park number that the user dials or speed dials. After
pressing Transfer, the user dials the directed call park number
to store the call.
Call Park BLF speed dial enables access to the directed call
park number and indicates that the directed call park number
is available or unavailable.
If you implement Directed Call Park, avoid
configuring the Park softkey. This prevents users from
confusing the two Call Park features.
Note
Directed Call Park
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, Do Not Disturb chapter.
Enables a user to temporarily stop incoming calls when it is
activated. If no call forwarding features are activated, calls to
this station are routed to a busy signal or voice mail when
DNDReject is active. Otherwise, all incoming calls are routed
to a preassigned call forwarding busy target.
Do Not Disturb
(DND)Reject
No configuration required.An icon displays on the phone screen when the phone is docked
in the desktop charger. The phone must be already paired with
the desktop charger.
Dock Icon Support
for Cisco Unified
Wireless IP Phone
7925G Desktop
Charger
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
154
Features, Templates, Services, and Users
Telephony Features Available

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals