Cisco 7925G Administration Guide

Configuration ReferenceDescriptionFeature
Requires no configuration.Allows users to call the most recently dialed phone number
by using a softkey option.
Redial
For more information, see:
•
Cisco Unified Communications
Manager Release 4.x: Cisco Unified
Communications Manager
Administration Guide, “Cisco Unified
IP Phone Configuration” chapter
•
Cisco Unified Communications
Manager Release 5.x or later: Cisco
Unified Communications Manager
Administration Guide, “Configuring
Directory Numbers” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Custom Phone Rings” chapter.
•
Custom Phone Rings Creation, on page
174
Identifies ring type used for a line when a phone has another
active call.
Ring setting
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified IP Phone Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phone Services” chapter
Allows you to use the Cisco Unified IP Phone Services
Configuration menu in Cisco Unified Communications
Manager Administration to define and maintain the list of
phone services to which users can subscribe.
Services
For more information, see Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Allows users to have multiple phones that share the same phone
number or allows users to share a phone number with a
coworker.
Shared Line
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified IP Phone Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
Dials a specified number that has been previously stored.
Speed dialing includes these features:
•
Speed-dial hot keys configured and stored in the local
Phone Book on the wireless IP phone.
•
Line view speed-dial numbers configured from the User
Options web page.
Speed dial
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
160
Features, Templates, Services, and Users
Telephony Features Available

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g