Claas ROLLANT 240 User Manual

8.3.2 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
Setting up the baler
Note!
If there are problems starting the baling for net
binding or net and twine binding, attach end
stops (A) 845037.0 or for twine binding, attach
end stops (B) 838789.0.
Open the side flaps and dismantle the right and left
protective panels.
Release the tension on the tension springs for the
oscillating section.
Use the hoist to lift the oscillating section and lift up to
the end stop.
net wrapping
For machines with net binding or with twine and net
binding, position end stop (A) and fasten screws (C)
and contact washers (E).
(Fig. 3)
twine- and net wrapping
For machines with twine binding, position the end stop
(B) and fasten with screws (C) and contact washers
(E).
(Fig. 4)
C
C
E
E
A
3
C
C
E
E
B
4

Claas ROLLANT 240 Specifications

General

Brand	Claas
Model	ROLLANT 240
Category	Lawn and Garden Equipment
Language	English