Claas ROLLANT 240 User Manual

11.6.12 BA ROLLANT 240 - 250 - 254 - 255 - 000 299 119 5
CLAAS COMMUNICATOR - operation
Twine wrapping including recharging the pressure
During the bale wrapping, the corresponding symbols
and figures are displayed.
Note!
Steps (7), (8) and (9) repeat themselves 9 times
during one baling process. That means that the
baling pressure in the hydraulic cylinder is
recharged every 17.5 seconds. This procedure
is stopped as soon as the bale is finished.
(Fig. 12)
0
1
2
3
4
5
6
7
8
9
12
State
(U)
Meaning
0 Initial state
1Delay
2 Start of twine wrapping
3 The machine must be stopped
4 Wrapping finished: Open the
tailgate and output the bale
5 Opening of the tailgate
6 Closing of the tailgate
7Delay
8 Set time interval for recharging the
pressure of the hydraulic cylinder:
15.5 s
9 Recharging the baling pressure in
the hydraulic cylinder: 2 s
0 Back to initial state

Claas ROLLANT 240 Specifications

General

Brand	Claas
Model	ROLLANT 240
Category	Lawn and Garden Equipment
Language	English