HelixNet | User Guide
7 Configuring and managing the Speaker Station from front
menus
This section describes how to configure the settings and manage the Speaker Station using Menu
mode. It also shows you how to monitor and diagnose performance issues, using the Diagnostics
menus.
Tip: For a quick reference to the Speaker Station menus, see Menu maps.
For general information about using the menus and configuring settings, see Using the Menus.
There is a next and a back activated by pressing the rotary encoders (right one for next, left one for
back). There are two levels of the menu, one on the left screen and one on the right. Next and back
shifts the menu by one level down or up.
7.1 Using the Menus
To place the Speaker Station in Menu mode, press the Menu key. The Speaker Station menus
appear in the display screens.
Notes: The Speaker Station menu comes up in the Roles menu by default.
If Menu mode is locked, you must unlock the menus from CCM before you can enter the
menu. See Administration.
7.1.1 Configuring Settings
To configure settings:
1. For each menu, turn the rotary control to scroll the menu items. Turn the rotary control:
l Counter-clockwise to scroll up the menu items.
l Clockwise to scroll down the menu items.
To return to the previous level of menu, press the left-hand rotary key.
To go to the next level of menu, press the right-hand rotary key.
Selected menu items are highlighted in solid yellow.
2. When you have selected a setting, press the right-hand rotary key to enable the setting on the
Speaker Station.
7.1.2 Exiting Menu Mode
To exit Menu mode do either of the following:
Press the Menu key.
Page 117
To Next Page
Loading...
