Clear-Com HelixNet Partyline - Entering and Exiting Menu Mode; Adjusting the Program Feed Volume Level

HelixNet | User Guide
11.2 Entering and Exiting Menu Mode
Use Menu mode to:
Configure the settings for the Beltpack, including Channel and audio settings.
Monitor beltpack performance and diagnose issues.
To enter Menu mode, press the Menu key. To exit Menu mode, press the Menu key again.
For more information about using Menu mode on the beltpack, see Configuring and
managing the beltpacks from front menus. For information on changing the beltpack IP
address, see Change the IP address of a HelixNet device from the front menu screens.
11.3 Adjusting the Program Feed Volume Level
To adjust the listen level (volume) of the Program Feed to the beltpack, turn the rear / base rotary
control.
Turn upwards to increase the listen level (volume), and downwards to decrease the listen level
(volume).
While the listen level is adjusted, the listen level for the Program Feed replaces the standard
Channel information on screen.
The Main Station is used to assign the Program Feed to Channels. For more information, see
Assigning the Program Listen to a Channel.
Page 143