HelixNet | User Guide
Editing the Loudspeaker
See Editing the Loudspeaker.
15.13 Editing the beltpack roles
15.13.1 Editing the Keyset
Each beltpack has two keysets, one for each selected Channel. The keyset is used to control the
Channel. You can configure:
Whether the talk keys are stacked
Which Channel is assigned to the keyset
If the Talk key on the keyset is latching or non-latching
1. From the top left of the Roles screen, select Beltpack (HBP).
2. From the drop-down list of roles, select the role you wish to edit.
3. Select Keyset.
4. Select the key you wish to edit.
5. To set a key as stacked, select the Stacked Key checkbox. For detail on setting stacked keys
see Configure a stacked key on a beltpack using the CCM.
6. To assign a different Channel to the key, click Key Assignment.
7. Select the Channel you require, and then click Done.
8. To configure Talk key operation, click Talk Key, and select Latching (default), Non-Latching
or Disabled.
9. Repeat the above steps for each keyset.
Page 182
To Next Page
Loading...
