Clear-Com HelixNet Partyline - Roles (System Limits)

HelixNet | User Guide
4. Click Add. This creates a new role which you will see on the left side of the page under device
type.
5. To edit a Role, click on it on the left side of the page so it has an orange highlight. Then access
configuration parameters on the center right of the page.
Note: Roles can be deleted in this page. You cannot delete the default Role
13.6 Roles (System Limits)
A HelixNet Link Group has a hard limit of 100 Roles. This includes default Roles.
Page 152