HelixNet | User Guide
8 Configuring and managing the beltpacks from front menus
This section describes how to configure the settings and manage the beltpacks using Menu mode.
It also shows you how to monitor and diagnose performance issues, using the Diagnostics
menus.
Tip: For a quick reference to the Main Station menus, see Menu maps.
8.1 Using the Menus
To place the beltpack in Menu mode, press the Menu key on the top of the beltpack.
Notes
:
The Beltpack menu shows the Roles menu by default.
If Menu mode is locked on the beltpack, you must unlock the menus from CCM before you
can enter the menu. See Administration.
To enter the menu mode from the Roles screen, press the left hand Call button.
8.1.1 Configuring settings
To configure settings:
1. For each menu, turn either of the side-mounted rotary controls to scroll the menu items. Turn
the rotary control:
l Counter-clockwise to scroll up the menu items.
l Clockwise to scroll down the menu items.
Off-screen menu items are indicated with arrows at the top and / or bottom of the display screen.
Back (with an arrow pointing left) indicates a previous level of menu.
To return to the previous level of menu, press the left-hand Call key.
An arrow pointing right indicates another level of menu under that menu item.
To go to the next level of menu, press the right-hand Call key.
Selected menu items are highlighted in solid yellow.
2. The final level of menu (the second or third display screen) displays the settings that relate to
your previous menu choices (system features or functionality).
The current setting is indicated by a dotted box around the menu item
When you have selected a setting, press the right-hand Call key to enable the setting on the Main
Station.
Page 121
To Next Page
Loading...
