HelixNet | User Guide
7.6.3 Resetting the Speaker Station to Default (Factory Mode) settings.
To reset the Speaker Station to its default (factory mode) settings see:
1. In Menu mode, select Administration and then Reset.
2. The third menu displays a selected menu item: Reset to Default.
3. In the fourth menu, select Reset Now.
7.7 Diagnostics
7.7.1 Viewing network information
To view network information, see Viewing network information.
7.7.2 Viewing Keysets Information
To view key sets information, see Viewing keyset information.
Page 120
To Next Page
Loading...
