HelixNet | User Guide
l See networking settings including Hostname, DHCP, IP address, subnet mask and
gateway.
l Pair to a Main Station.
l Set the expansion mode for your device.
6.6.1 Viewing Network Preferences
To view network preferences:
1. In Menu mode, select Networking > Preferences
You can view the following:
l Hostname
l DHCP enabled or disabled
l IP address
l Subnet Mask
l Gateway
6.6.2 Pairing to a Main Station
To pair to a Main Station:
1. In Menu mode, select Networking > Pair to Station.
2. Select By Name or By Address.
6.6.3 Using Expansion Mode
To enable your Remote Station as a host in expansion mode, or to expand to another device:
1. In Menu mode, select Networking > Expansion Mode.
2. Select Host or Expand to Host.
6.7 Administration
In Menu mode > Administration, you can:
l View the current versions of the software for the system.
l Update the software (firmware).
l Reset the Remote Station to the default (factory mode) settings.
Page 112
To Next Page
Loading...
