HelixNet | User Guide
3 Installing HelixNet Partyline
This section describes how to install your HelixNet Partyline system. It also provides basic
guidance on planning your installation.
For related information, see Cabling reference and the Online Powerline cable distance calculator
at:
https://clearcom.com/DownloadCenter/technicaldocs/HelixNetCablingCalculator/index.html#/
Tip: For guidance on connecting HelixNet Partyline to other systems, using the optional interface
modules, see Connecting to Other Intercom Systems.
Do not plug any non-approved equipment into HelixNet Partyline.
HelixNet Partyline operates at different voltage levels than analog two-wire Partyline systems.
Do not plug any analog two-wire Partyline equipment into the HelixNet Partyline ports, as this
may cause damage.
For more safety instructions, see Important Safety Instructions
3.1 Planning your HelixNet Partyline installation
3.1.1 Comparing digital with analog cabling
Note: The program is always a participant within a Channel and cannot exist outside of a Channel.
Key to analog and digital cabling comparison diagram
Feature Description
Page 54
To Next Page
Loading...
