HelixNet | User Guide
7.4 Connecting the Speaker Station to a Main Station
To connect the Speaker Station to a Main Station, see Connecting the Remote.
7.5 Networking
In Menu mode > Networking, you can:
l See networking settings including DHCP, IP address, subnet mask and gateway.
l Pair to a Main Station.
7.5.1 Viewing Network Preferences
To view network preferences:
1. In Menu mode, select Networking > Preferences
You can view the following:
l DHCP enabled or disabled
l IP address
l Subnet Mask
l Gateway
7.5.2 Pairing to a Main Station
To pair to a Main Station:
1. In Menu mode, select Networking > Pair to Station.
2. Select By Name or By IP Address.
7.6 Administration
7.6.1 Viewing the current versions of the software
To view the current version of the software, see Viewing the current versions of the software.
7.6.2 Updating the Software
To update the software, see Updating the software.
Note: You can only update the Speaker Station software from the Main Station.
Page 119
To Next Page
Loading...
