HelixNet | User Guide
15 Using the CCM to configure Roles
15.1 Editing Main Station roles
You can edit any Main Station Role including default Roles in the CCM.
15.2 Editing the Keyset
Each device has four Keysets, one for each Channel. The Keyset is used to control the Channel.
You can configure:
Which Channel is assigned to the Keyset
If the Talk key on the Keyset is latching or non-latching
1. From the drop-down list of Roles, select the Role you wish to edit.
2. Select Keyset.
3. Select the key you wish to edit (Channel 1, 2, 3, or 4).
4. To assign a different Channel to the key, click Key Assignment.
Page 170
To Next Page
Loading...
