HelixNet | User Guide
Editing the Headset
See Editing the headset.
Editing the Microphone
See Editing the microphone.
15.14 Configure a Stacked Key on a Beltpack using the CCM
You can configure stacked keys on a beltpack, putting two or more Channels on the same key.
This enables the beltpack user to talk and listen to two groups simultaneously. Pressing the Talk or
Call button on the beltpack will initiate a talk or call to all the Channels on the stacked key. If any
Channel user activates a call to the beltpack, the Call label will flash and vibrate if enabled.
Beltpack stacked keys can only be configured through the Core Configuration Manager (CCM).
To configure a stacked key on a beltpack:
1. Navigate to Roles >Beltpack (HBP) > Role > Keysets and select the Channel Tab you wish
to stack a key on.
2. Click the Stacked Key checkbox. This automatically unassigns any Channels already on this
Keyset.
3. Click Key Assignment
4. Select all the Channels you wish to assign to the Keyset. Click Done. The Channels will be
stacked on the Keyset.
Page 184
To Next Page
Loading...
