HelixNet | User Guide
19.7 Connecting HelixNet Partyline to Eclipse
®
19.7.1 About Eclipse
Eclipse is the digital matrix system from Clear-Com. A wide choice of system frames, system
cards and modules enables the unification of multiple intercom systems (digital, analog, wired and
wireless) in a single intercoms infrastructure.
Eclipse is configured, managed and maintained using the intuitive Eclipse Configuration Software
(EHX). The Production Maestro
®
software provides a centralized routing tool, to assist with four-
wire configurations. Logic Maestro is a graphical programming tool for EHX, simplifying the design
and programming of complex logical functions.
The following procedures reference the following Eclipse devices:
The Eclipse or Eclipse-HX system frame. For example, the Eclipse Median is a 6RU frame that
houses 2 CPU and 7 matrix slots with 8 built-in interface module slots.
The CCI-22 interface module. The CCI-22 is the two-wire party-line interface (Clear-Com and /
or RTS) to Eclipse. EHX views a direct, four-wire HelixNet Party-line connection with the system
frame as a ‘virtual’ CCI-22 connection.
Tip: For more information about Eclipse, see your Eclipse / EHX documentation or visit the digital
matrix pages on the Clear-Com website: http://www.clearcom.com/product/digital-matrix.
Page 221
To Next Page
Loading...
