HelixNet | User Guide
8.10.1 Viewing Information About the Hardware (Main PCB) on the Beltpack
To view information about the Part, Revision and Serial number of the main PCB on the
beltpack:
1. In Menu mode, press the left-hand Call Key and then select Diagnostics.
2. Select Hardware > Main PCB.
The Part, Revision and Serial number for the PCB are displayed. The format is
similar to the following:
Part xxxxxxx
Revision: x
Serial: x
Where x is a numerical value.
8.10.2 Viewing Powerline Information and Status
To view powerline information and status:
1. In Menu mode, press the left-hand Call Key and then select Diagnostics.
2. Select Powerline.
The status and other powerline information are displayed. For more information, see
Menu maps.
Page 130
To Next Page
Loading...
