Clear-Com HelixNet Partyline - Page 270

HelixNet | User Guide
Menu 1 (First) > Menu 2 > Menu 3 (Last)
Beltpack Settings Left Channel None
Channel assign (1 – 24)
Talk (latch/non latch)
Default: Latch
USB flasher (disabled/blinking/solid)
Default: disabled
Right Channel
Vibrate On Call On
Off
Default: Off
Display Settings OLED Brightness High
Medium
Low
Default: Medium
Key Brightness High / Low
High / Off
Low / Off
Off / Off
Default: High / Low
Rotate Display Enabled
Disabled
Default: Disabled
Screensaver Channel
Hostname
Role (default)
Blank
Disabled
Network (HBP-2X and
HXII-BP-X4 over
powerline)
IP Address IP address: xx.xx.xx.xx where x is a
numeric value
Network (HXII-BP-X4
powered over Ethernet)
Pair to Station By Name
By Address
Page 270