ComAp InteliDrive DCU Marine - Page 46

ID-DCU-MARINE-2.2.2, ©ComAp – June 2015 - 46 -
ID-DCU-MARINE-2.2.2.pdf
 Conversion from ± 20mA to ±100% request
Request [%]
-20 mA
20 mA
+100%
mA
0 mA
-100%
Sensor fail
Sensor fail
Bargraph
0%
+100%
Sensor characteristics ± 20mA works in full ± range on ID-DCU
MARINE AI5 to AI8 only. ID-DCU MARINE AI1 to AI4 measures 0 to
20 mA range only.
Default sensor characteristics creates conversion to ±100%.
Bargraph indicates only positive values 0 to +100%.