©2024 Comba Telecom. All Rights Reserved.
568 Gibraltar Drive, Milpitas, CA 95035 | +1 408 526 0180
7.13 APPENDIX M: V3 BDA/MU/RU ADDITIONAL CABINET LOCK ASSEMBLY
The V3 BDA/MU/RU devices have additional locking mechanism hardware which can be purchased separately
to allow the device to be secured shut using a standard lock provided by the customer. See Figure 199 below
for more details. Contact your local Comba Sales Representative for more information.
• Install the bottom lock plate that has four holes using the provided screws.
• Install the top cabinet latch that has two holes using the provided screws.
• Install the lock (customer provided)
Figure 199: V3 BDA/MU/RU Additional Cabinet Lock Assembly Installation
End of Section
End of Document
Close Latch
and Install
To Next Page
Loading...