©2025 Copeland LP.
026-1803 R13 Supervisor I&O User Guide 5 - 3
The following run time logs are available to the user:
Note: Reset Input - is used to trigger a reset on the runtime data.
Runtime Logging Definition
The definition of outputs that have runtime logging enabled is determined and defined at the creation of the application
description file. By default, not all outputs of an application are enabled for runtime logging.
Application Data Logging
The system provides individual or value-add applications the ability to log application specific data. The system allows the
remote clients to retrieve these logs.
Analog Points
Average since reset command issued
Minimum value since reset command issued
Minimum value today
Minimum value yesterday
Maximum value since reset command issued
Maximum value today
Maximum value yesterday
Digital Points
Cycle counts since reset command issued
Cycle counts today
Cycle counts yesterday
Runtime since reset command issued
Runtime today
Runtime yesterday
To Next Page
Loading...