Copeland E3 - Appendix A: Alarm Advisories

©2025 Copeland LP.
026-1803 R13 Supervisor I&O User Guide A - 1
Appendix A: Alarm Advisories
The table below is a list of all alarm messages that may appear in the Supervisory Controller Alarm Advisory Log. Each alarm
message is listed by its Alarm Items, Alarm Category and Cell Name.
Note: The Supervisory Controller has the ability to disable advisories from XM and XR devices when desired. In the
Device Application Details Page, Alarm Conf tab, Select “Disable” from the list to disable alarms that are not desired.
Alarm Items Category Cell Name Description
Read Data
Failed AI 01
Device
Alarm
IPX6/IPX15/IPX25
Can be configured to different sensor types; they can be
configured as “
Input not used” or “Digital Input”. If configured to
a specific type sensor, whereas there is no sensor connected to
this port or there is something wrong with the connected
sensor, and no valid data can be read from the analog input, the
corresponding alarm will be generated. The alarm is not
applicable if the analog input is configured to “
Input not used”
or “
Digital Input”.
Read Data
Failed AI 02
Device
Alarm
IPX6/IPX15/IPX25
Can be configured to different sensor types; they can be
configured as “
Input not used” or “Digital Input”.If configured to
a specific type sensor, whereas there is no sensor connected to
this port or there is something wrong with the connected
sensor, and no valid data can be read from the analog input, the
corresponding alarm will be generated. The alarm is not
applicable if the analog input is configured to “
Input not used”
or “
Digital Input”.
Read Data
Failed AI 03
Device
Alarm
IPX6/IPX15/IPX25
Can be configured to different sensor types; they can be
configured as “
Input not used” or “Digital Input”. If configured to
a specific type sensor, whereas there is no sensor connected to
this port or there is something wrong with the connected
sensor, and no valid data can be read from the analog input, the
corresponding alarm will be generated. The alarm is not
applicable if the analog input is configured to “
Input not used”
or “Digital Input”.
Read Data
Failed AI 04
Device
Alarm
IPX6/IPX15/IPX25
Can be configured to different sensor types; they can be
configured as “
Input not used” or “Digital Input”. If configured to
a specific type sensor, whereas there is no sensor connected to
this port or there is something wrong with the connected
sensor, and no valid data can be read from the analog input, the
corresponding alarm will be generated. The alarm is not
applicable if the analog input is configured to “
Input not used”
or “
Digital Input”.
Read Data
Failed AI 05
Device
Alarm
IPX6/IPX15/IPX25
Can be configured to different sensor types; they can be
configured as “Input not used” or “Digital Input”. If configured to
a specific type sensor, whereas there is no sensor connected to
this port or there is something wrong with the connected
sensor, and no valid data can be read from the analog input, the
corresponding alarm will be generated. The alarm is not
applicable if the analog input is configured to “
Input not used”
or “
Digital Input”.