EasyManua.ls Logo

Cypress PSoC 4000 Series - 9. Power Supply and Monitoring

Cypress PSoC 4000 Series
178 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PSoC 4000 Family: PSoC 4 Architecture TRM, Document No. 001-89309 Rev. *D 61
9. Power Supply and Monitoring
PSoC
®
4 is capable of operating from a 1.71 V to 5.5 V externally supplied voltage. This is supported through one of the two
following operating ranges:
1.80 V to 5.50 V supply input to the internal regulators
1.71 V to 1.89 V
1
direct supply
There are different internal regulators to support the various power modes. These include Active digital regulator, Quiet regu-
lator, and Deep-Sleep regulator.
1. When the system supply is in the range 1.80 V to 1.89 V, both direct supply and internal regulator options can be used. The selection can be made depending
on the user’s system capability. Note that the supply voltage cannot go above 1.89 V for the direct supply option because it will damage the device. It should
not go below 1.80 V for the internal regulator option because the regulator will turn off.

Table of Contents

Related product manuals