DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
92
The fields that can be configured are described below:
Parameter Description
Asymmetric VLAN State
Select this option to enable or disable the asymmetric VLAN function
Click the Apply button to accept the changes made.
VLAN Interface
This window is used to view and configure VLAN interface settings.
To view the following window, click L2 Features > VLAN > VLAN Interface, as shown below:
Figure 5-15 VLAN Interface window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
Click the View Detail button to view more detailed information about the VLAN on the specific interface.
Click the Edit button to re-configure the specific entry.
After clicking the VLAN Detail button, the following page will appear.
To Next Page
Loading...
