DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
47
Figure 4-19 RMON Event Settings
The fields that can be configured are described below:
Parameter Description
Index
Enter the index of the alarm entry between 1 and 65535.
Description
Enter a description for the RMON event entry. The string is up to 127
characters long.
Type Select the RMON event entry type. Options to choose from are None,
Log, Trap, and Log and Trap.
Community
Enter the community string. The string can be up to 127 characters.
Owner
Enter the owner string. The string can be up to 127 characters.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the View Logs button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the View Logs button, the following window will appear.
Figure 4-20 Event Logs Table window
Click the Back button to return to the previous window.
Telnet/Web
This window is used to configure Telnet and Web settings on the Switch.
To view the following window, click Management > Telnet/Web, as shown below:
To Next Page
Loading...
