DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
289
Authentication Settings
This window is used to view and configure the AAA network and EXEC authentication settings.
To view the following window, click Security > AAA > Authentication Settings, as shown below:
Figure 9-21 Authentication Settings window
The fields that can be configured for AAA Authentication 802.1X are described below:
Parameter Description
Status
Select to enable or disable the AAA 802.1X authentication state here.
Method 1 to 4
Select the method lists that will be used for this configuration here.
Options to choose from are none, local, group and radius.
Click the Apply button to accept the changes made.
The fields that can be configured for AAA Authentication JWAC are described below:
Parameter Description
Status
Select to enable or disable the AAA JWAC authentication state here.
Method 1 to 4
Select the method lists that will be used for this configuration here.
Options to choose from are none, local, group and radius.
Click the Apply button to accept the changes made.
The fields that can be configured for AAA Authentication MAC-Auth are described below:
Parameter Description
Status
Select to enable or disable the AAA MAC authentication state here.
Method 1 to 4
Select the method lists that will be used for this configuration here.
Options to choose from are none, local, group and radius.
Click the Apply button to accept the changes made.
To Next Page
Loading...
