DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
297
Figure 9-33 TACACS Group Server Settings window
The fields that can be configured are described below:
Parameter Description
Group Server Name
Enter the TACACS group server’s name here. This name can be up to
15 characters long.
IPv4 TACACS Server IP
Enter the group server’s IPv4 address here.
IPv6 TACACS Server IP
Enter the group server’s IPv6 address here.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the Detail button to view and configure more detailed settings for the TACACS group server.
After clicking the Detail button, the following page will be available.
Figure 9-34 TACACS Group Server Settings - Detail window
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
TACACS Statistic
This window is used to view and clear the TACACS statistic information.
To view the following window, click Security > TACACS > TACACS Statistic, as shown below:
To Next Page
Loading...
