D-Link DGS-1510 Series - Port Configuration; Port Settings

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
11
Unit
Select the switch unit that will be used for this configuration here.
Thermal
Select the thermal sensor ID.
High Threshold
Enter the high threshold value of the warning temperature setting. The
range is from -100 to 200 Celsius degree. Tick the Default check box
to return to the default value.
Low Threshold
Enter the low threshold value of the warning temperature setting. The
range is from -100 to 200 Celsius degree. Tick the Default check box
to return to the default value.
Click the Apply button to accept the changes made.
Port Configuration
Port Settings
This window is used to view and configure the Switch’s port settings.
To view the following window, click System > Port Configuration > Port Settings, as shown below:
Figure 3-4 Port Settings window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.