DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
56
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Format
Select the DHCP information circuit ID format. Option to choose from
is Vendor3.
Type
Select the DHCP information circuit ID format typ. Options to choose
from are Remote ID, and Circuit ID.
Value
Enter the vendor-defined string.
Click the Apply button to accept the changes made.
DHCP Local Relay VLAN
This window is used to configure local relay on a VLAN or a group of VLANs.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Local Relay VLAN,
as shown below:
Figure 4-34 DHCP Local Relay VLAN window
The fields that can be configured are described below:
Parameter Description
DHCP Local Relay VID List Enter the VLAN ID for DHCP local relay. Tick the All VLANs check
box to select all VLANs.
State
Select this option to enable or disable the DHCP local relay on the
specific VLAN(s).
Click the Apply button to accept the changes made.
DHCPv6 Relay
DHCPv6 Relay Global Settings
This window is used to configure the DHCPv6 relay remote ID.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global
Settings, as shown below:
To Next Page
Loading...
