DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
57
Figure 4-35 DHCPv6 Relay Global Settings window
The fields that can be configured are described below:
Parameter Description
IPv6 DHCP Relay Remote ID
Format
Select to choose the sub-type of the remote ID. Options to choose
from are Default, CID with User Define, and User Define.
IPv6 DHCP Relay Remote ID
UDF
Select to choose the User Define Field (UDF) for remote ID. Options to
choose from are ASCII, and Hex.
ASCII - Select to enter the ASCII string with a maximum of 128
characters in the text box.
HEX - Select to enter the hexadecimal string with a maximum of 256
characters in the text box.
IPv6 DHCP Relay Remote ID
Policy
Select to choose Option 37 forwarding policy for the DHCPv6 relay
agent. Options to choose from are Keep, and Drop.
Keep - Select to discard the packet that already has the relay agent
Remote-ID Option 37.
Drop - Select that the DHCPv6 request packet that already has the
relay agent Remote-ID option is left unchanged and directly relayed to
the DHCPv6 server.
IPv6 DHCP Relay Remote ID
Option
Select this option to enable or disable the insertion of the relay agent
remote ID Option 37 during the relay of DHCP for IPv6 request
packets.
Click the Apply button to accept the changes made.
DHCPv6 Relay Interface Settings
This window is used to configure and display the DHCPv6 relay interface settings.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Interface
Settings, as shown below:
Figure 4-36 DHCPv6 Relay Interface Settings window
To Next Page
Loading...
