DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
125
Unit
Select the switch unit that will be used for this configuration here. This
is available when Port is selected in the Statistics drop-down list.
From Port / To Port
Select the appropriate port range used for the configuration here. This
is available when Port is selected in the Statistics drop-down list.
Click the Clear button to clear the MLD snooping related statistics.
The fields that can be configured for MLD Snooping Statistics Table are described below:
Parameter Description
Find Type Select the interface type. Options to choose from are VLAN, and Port.
VID Enter a VLAN ID between 1 and 4094. This is available when VLAN is
selected in the Find Type drop-down list.
Unit
Select the switch unit that will be used for this configuration here. This
is available when Port is selected in the Find Type drop-down list.
From Port / To Port
Select the appropriate port range used for the configuration here. This
is available when Port is selected in the Find Type drop-down list.
Click the Find button to locate a specific entry based on the information entered.
Click the Find All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Multicast Filtering
This window is used to view and configure the Layer 2 multicast filtering settings.
To view the following window, click L2 Features > L2 Multicast Control > Multicast Filtering, as shown
below:
Figure 5-49 Multicast Filtering window
The fields that can be configured are described below:
Parameter Description
VID List
Enter the VLAN ID list that will be used for this configuration here.
Multicast Filter Mode
Select the multicast filter mode here. Options to choose from are
Forward Unregistered, Forward All, and Filter Unregistered. When
selecting the Forward Unregistered option, registered multicast
packets will be forwarded based on the forwarding table and all
unregistered multicast packets will be flooded based on the VLAN
domain. When selecting the Forward All option, all multicast packets
will be flooded based on the VLAN domain. When selecting the Filter
Unregistered option, registered packets will be forwarded based on
To Next Page
Loading...
