D-Link DGS-1510 Series - SNTP Settings

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
28
To: Month
Select the month that summer time will end.
To: Time (HH:MM)
Select the time of the day that summer time will end.
Offset
Enter the number of minutes to add during summer time. The default
value is 60. The range of this offset is 30, 60, 90 and 120.
The fields that can be configured for Date Setting are described below:
Parameter Description
From: Date of the Month
Select date of the month that summer time will start.
From: Month
Select the month that summer time will start.
From: Year
Enter the year that the summer time will start.
From: Time (HH:MM)
Select the time of the day that summer time will start.
To: Date of the Month
Select date of the month that summer time will end.
To: Month
Select the month that summer time will end.
To: Year
Enter the year that the summer time will end.
To: Time (HH:MM)
Select the time of the day that summer time will end.
Offset
Enter the number of minutes to add during summer time. The default
value is 60. The range of this offset is 30, 60, 90 and 120.
Click the Apply button to accept the changes made.
SNTP Settings
This window is used to configure the time settings for the Switch.
To view the following window, click System > Time and SNTP > SNTP Settings, as shown below:
Figure 3-22 SNTP Settings window
The fields that can be configured for SNTP Global Settings are described below:
Parameter Description
SNTP State
Select this option to enable or disable SNTP.
Poll Interval
Enter the synchronizing interval in seconds. The value is from 30 to
99999 seconds. The default interval is 720 seconds.