D-Link DGS-1510 Series - 6 Layer 3 Features; Arp; ARP Aging Time; Static ARP

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
137
6. Layer 3 Features
ARP
Gratuitous ARP
IPv4 Interface
IPv4 Static/Default Route
IPv4 Route Table
IPv6 Interface
IPv6 Neighbor
IPv6 Static/Default Route
IPv6 Route Table
ARP
ARP Aging Time
This window is used to view and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
Figure 6-1 ARP Aging Time window
The fields that can be configured are described below:
Parameter Description
Timeout
Enter the ARP aging timeout value here.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Static ARP
This window is used to view and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below: