D-Link DGS-1510 Series - 9 Security; Port Security; Port Security Global Settings

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
275
9. Security
Port Security
802.1X
AAA
RADIUS
TACACS
IMPB
DHCP Server Screening
ARP Spoofing Prevention
BPDU Attack Protection
MAC Authentication
Web-based Access Control
Japanese Web-based Access Control
Network Access Authentication
Safeguard Engine
Trusted Host
Traffic Segmentation Settings
Storm Control
DoS Attack Prevention Settings
SSH
SSL
Port Security
Port Security Global Settings
This window is used to view and configure the port security global settings. Port Security is a security
feature that prevents unauthorized computers (with source MAC addresses) unknown to the Switch prior
to locking the port (or ports) from connecting to the Switch's locked ports and gaining access to the
network.
To view the following window, click Security > Port Security > Port Security Global Settings, as shown
below:
Figure 9-1 Port Security Global Settings window
The fields that can be configured for Port Security Trap Settings are described below:
Parameter Description
Trap State
Click to enable or disable port security traps on the Switch.
Click the Apply button to accept the changes made.
The fields that can be configured for Port Security Trap Rate Settings are described below: