DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
379
Click the Stop button to halt the Ping Test.
Click the Back button to return to the IPv4 Ping section.
After clicking the Start button in IPv6 Ping section, the following IPv6 Ping Result section will appear:
Figure 13-14 Ping – IPv6 Ping Result window
Click the Stop button to halt the Ping Test.
Click the Back button to return to the IPv4 Ping section.
Trace Route
The trace route page allows the user to trace a route between the Switch and a given host on the network.
To view the following window, click Tools > Trace Route, as shown below:
Figure 13-15 Trace Route window
To Next Page
Loading...
