D-Link DGS-1510 Series - SNMP Group Table Settings

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
39
Figure 4-8 SNMP Community Table Settings window
The fields that can be configured are described below:
Parameter Description
Key Type
Select the key type for the SNMP community. Options to choose from
are Plain Text, and Encrypted.
Community Name
Enter an alphanumeric string of up to 32 characters that is used to
identify members of an SNMP community. This string is used like a
password to give remote SNMP managers access to MIB objects in
the Switch’s SNMP agent.
View Name
Enter an alphanumeric string of up to 32 characters that is used to
identify the group of MIB objects that a remote SNMP manager is
allowed to access on the Switch. The view name must exist in the
SNMP View Table.
Access Right Select the access right here. Options to choose from are Read Only,
and Read Write.
Read Only - SNMP community members using the community string
created can only read the contents of the MIBs on the Switch.
Read Write - SNMP community members using the community string
created can read from, and write to the contents of the MIBs on the
Switch.
IP Access-List Name
Enter the name of the standard access list to control the user to use
this community string to access to the SNMP agent.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
SNMP Group Table Settings
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the
views created in the previous window.
To view the following window, click Management > SNMP > SNMP Group Table Settings, as shown
below: