D-Link DGS-1510 Series - Configuration Backup to HTTP; Configuration Backup to TFTP

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
375
server in the space provided.
Source URL
Enter the source filename and path of the configuration file located on
the TFTP server here. This field can be up to 64 characters long.
Destination URL
Enter the destination path and location where the configuration file
should be stored on the Switch. This field can be up to 64 characters
long. Select the running-config option to restore and overwrite the
running configuration file on the Switch. Select the startup-config
option to restore and overwrite the start-up configuration file on the
Switch.
Replace
Select this option to replace the current running configuration.
Click the Restore button to initiate the configuration restore.
Configuration Backup to HTTP
This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to HTTP, as shown below:
Figure 13-8 Configuration Backup to HTTP window
The fields that can be configured are described below:
Parameter Description
Unit
Select the switch unit that will be used for this configuration here.
Source URL
Enter the source filename and path of the configuration file located on
the Switch here. This field can be up to 64 characters long. Select the
running-config option to back up the running configuration file from
the Switch. Select the startup-config option to back up the start-up
configuration file from the Switch.
Click the Backup button to initiate the configuration file backup.
Configuration Backup to TFTP
This window is used to initiate a configuration file backup to a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup
to TFTP, as shown below:
Figure 13-9 Configuration Backup to TFTP window